This article mainly introduces:

Belarus hydraulic cylinder,servo cylinder manufacturer,servo cylinder

(Belarus servo cylinder,produced by Hengyu Group）

servo cylinder are widely used in Belarus，because of no transmission clearance，powerful torque，clever hydraulic energy conversion.So our company has designed servo cylinder for customers from Belarus.

Introduction to servo cylinder:

The daily inspection of the servo cylinder includes: checking the connection of the servo cylinder and the pipe joint for leaks. Check the servo cylinder rod for leaks. Check the servo cylinder connection for leaks. When the servo cylinder moves, the work is normal and smooth. Whether the servo cylinder has internal leakage.

How to repair the servo cylinder body when it is damaged: When the servo cylinder has trace deformation and shallow tensile marks, the servo cylinder is repaired by strong honing process. The heavy honing process can repair servo cylinders up to 2.5 times out of tolerance than the original tolerance. It honed the parts with excessive size or shape error through a powerful honing machine, so that the overall size, shape tolerance and roughness of the servo cylinder can meet the technical requirements.

When the servo cylinder needs to be disassembled for maintenance due to leakage and other faults, the piston should be moved to the bottom position of the servo cylinder, and hard beating and sudden drop are strictly prohibited during disassembly.

If it is found that the servo cylinder lubrication is poor or the servo cylinder bore processing is abnormal, it is necessary to feedback the situation to the manufacturer, because the piston and the servo cylinder, the guide rail and the piston rod have relative movement, if the lubrication is poor or the servo cylinder bore is abnormal, it will aggravate the wear and reduce the straightness of the servo cylinder center line. In this way, when the piston works in the servo cylinder, the friction resistance will be large and small, resulting in slip or crawling. The solution is to repair and grind the servo cylinder first, and then prepare the piston according to the matching requirements, repair and grind the piston rod, and configure the guide sleeve.

Answers to some questions about servo cylinder:

What are the connection methods of the hydraulic cylinder? The connection modes of the cylinder and the actuator are earring connection, hinge shaft connection, thread connection, etc. The connection modes of tubing and cylinder are threaded connection, flange connection, etc.

What hydraulic valve is used to control a cylinder back and forth?
Direction valve is available. Direction valve includes electromagnetic directional valve, manual directional valve, check valve, hydraulic control check valve, the specific choice of which direction valve, you need to see the use of conditions.