This article mainly introduces:

Kenya hydraulic cylinder,tilting furnace hydraulic cylinder manufacturer,tilting furnace hydraulic cylinder

(Kenya tilting furnace hydraulic cylinder,produced by Hengyu Hydraulic Cylinder Factory）

tilting furnace hydraulic cylinder are widely used in Kenya，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed tilting furnace hydraulic cylinder for customers from Kenya.

Introduction to tilting furnace hydraulic cylinder:

The difference between the plunger tilting furnace hydraulic cylinder and the piston tilting furnace hydraulic cylinder is that the piston in the tilting furnace hydraulic cylinder is replaced by a shaft plunger, which is used in hydraulic transmission requiring a long mechanical stroke, and can only input pressure oil from one direction, pressurize in a single direction, and form a thrust to push the plunger to move. The return trip of the plunger depends on the plunger itself to fall, and some rely on the spring to push back to the original position. Usually used plunger type tilting furnace hydraulic cylinder, its inner hole does not need mechanical finishing, as long as the plunger round grinding can be assembled.

The definition of the minimum stable speed refers to the minimum movement speed of the tilting furnace hydraulic cylinder without crawling phenomenon when the full load is moving, it has no uniform indicator, and the tilting furnace hydraulic cylinder that undertakes different work has different requirements for the minimum stable speed.

The tilting furnace hydraulic cylinder should be used correctly and maintained regularly. The tilting furnace hydraulic cylinder should be deflated before use, the buffer regulating valve should be adjusted to a reasonable position, the cleanliness of the oil should be checked regularly, the dust on the tilting furnace hydraulic cylinder should be cleaned regularly, and attention should be paid to waterproof and fireproof.

The main role of the tilting furnace hydraulic cylinder: the tilting furnace hydraulic cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the tilting furnace hydraulic cylinder realizes reciprocating motion. The structure of the tilting furnace hydraulic cylinder has three categories: piston tilting furnace hydraulic cylinder, plunger tilting furnace hydraulic cylinder, swing tilting furnace hydraulic cylinder, piston tilting furnace hydraulic cylinder and plunger tilting furnace hydraulic cylinder to achieve reciprocating linear motion, output speed and thrust, swing tilting furnace hydraulic cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the tilting furnace hydraulic cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The tilting furnace hydraulic cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

Answers to some questions about tilting furnace hydraulic cylinder:

How to distinguish large cavity and small cavity of excavator rod cylinder ?
Single rod piston cylinder is a form of cylinder that is used relatively most, and the boom, bucket, dozer shovel cylinder are all in this form. Among them, the rodless cavity is also called the large cavity, and the rodless cavity is also called the small cavity. Therefore, the cylinder cavity on the side with the exposed piston rod is the small cavity, and the cylinder cavity on the side without the exposed rod is the large cavity.

When the hydraulic cylinder changes from fast to slow, how can the slow speed become more even and the speed can be adjusted?
Reversing valve set 2 reversing valves. The back of one valve goes directly to the cylinder, running at full speed for fast action. Add a speed control valve behind the other valve, and then connect to the cylinder to achieve slow action, you can adjust the opening of the speed control valve, to achieve the speed of the cylinder can be adjusted. An import speed control valve to more than 1,000 yuan, if you think it is too expensive, you can also use the throttle valve instead. However, the throttle valve is greatly affected by the load change.