This article mainly introduces:

El Salvador hydraulic cylinder,steering power cylinder manufacturer,steering power cylinder

(El Salvador steering power cylinder,produced by Hengyu Hydraulic Co., Ltd）

steering power cylinder are widely used in El Salvador，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed steering power cylinder for customers from El Salvador.

Introduction to steering power cylinder:

When the steering power cylinder is installed, the piston and the steering power cylinder head and other parts have large mass, large size and large inertia, even if there is a lifting equipment auxiliary installation, because the specified clearance is small, no matter how hard it will be put into, therefore, the end of the piston or the steering power cylinder head boss is easy to cause scars when it hits the inner surface of the steering power cylinder wall. The solution to this problem: for a large number of small products, the use of autocratic assembly oriented tools during installation; For heavy, thick and large large and medium-sized steering power cylinders, only careful and careful operation can be avoided.

The material, shape and compression of the steering power cylinder seal have a great impact on the service life and work efficiency of the steering power cylinder. In addition to requiring a reliable seal, it should also have a long service life and less friction loss. At present, there are many seal manufacturers in the country, and it is also crucial to choose high-quality seals with reliable and stable quality.

steering power cylinder installation precautions: Before installing the steering power cylinder into the system, the parameters on the steering power cylinder label should be compared with the parameters when ordering. The base of the steering power cylinder must have sufficient stiffness, otherwise the steering power cylinder will bend upward into a bow when pressurized, so that the piston rod will bend.

Disassembly steering power cylinder: When disassembly steering power cylinder, strictly prevent damage to the screw thread at the top of the piston rod, the screw thread of the steering power cylinder head and the surface of the piston rod. It should also be noted that the piston cannot be played out from the steering power cylinder.

Answers to some questions about steering power cylinder:

What is the bearing capacity of the HOB cylinder?
The normal specification of HOB is 140 kg pressure, which is more commonly used in the market, and there are clear marks on the cylinder, 210 kg is a strengthened version of HOB, generally customized cylinders are also clearly marked on the above, when the specific use of the cylinder, the maximum use pressure is marked on the cylinder.

How to set up the one-way cylinder hydraulic system?
Single acting oil cylinder, that is, an oil cylinder with an oil port, can use two three-way valves to control the cylinder action. The three oil ports are respectively connected to P (oil pump), A (oil cylinder), and T (oil tank). If the oil pump is to run continuously, an electromagnetic relief valve can be added. When the cylinder is not moving, the relief valve can unload the oil pump. You can also add a three-way four-way valve, the middle function is unloaded, two outlets: A connected to the fuel tank, B connected to the cylinder.