This article mainly introduces:

Ghana hydraulic cylinder,steering power cylinder manufacturer,steering power cylinder

(Ghana steering power cylinder,produced by Hengyu Group）

steering power cylinder are widely used in Ghana，because of no transmission clearance，powerful torque，clever hydraulic energy conversion.So our company has designed steering power cylinder for customers from Ghana.

Introduction to steering power cylinder:

The steering power cylinder requires that the filtration accuracy of the system is not less than the 80um, and the oil pollution should be strictly controlled, the oil should be kept clean, the performance of the oil should be checked regularly, and the necessary fine filtration and replacement of new working oil should be carried out.

The role of the steering power cylinder in the mold industry: the steering power cylinder has a variety of uses in the mold, one is that the core distance is very large, or because of the mechanism of the product, only the steering power cylinder is reasonable or more cost saving. Let the side core be extracted before opening the mold. Hot runner is mainly based on the product to decide, sometimes customers require the use of hot runner, the price is more expensive, but there are many benefits, you can save raw materials, shorten the molding cycle The steering power cylinder has an irreplaceable role in the heavy industry production process: it is mainly used in places that need to support heavy objects for a long time, and it can still support heavy objects when the oil pressure is removed, and it is safe and reliable. Can be used underwater, single action, load reversion, nut self-locking to make the load safer, especially in large projects, is easy to operate control and self-locking jack, designed with a safety pressure retaining device, built-in pressure relief valve to prevent overload, to protect the self-locking jack to facilitate safe operation. The connection of the device is connected by high pressure hose and threaded joint, which has the advantages of fast use and overcoming the shortcomings of fast traditional joint oil leakage. It is mainly used for equipment installation and toppling operation in various industries such as electric power, construction, machinery manufacturing, mining, railway bridge, shipbuilding and so on.

The difference between the integral steering power cylinder and the split steering power cylinder: The integral steering power cylinder and the split steering power cylinder in the steering power cylinder are two different steering power cylinders, and they are very different. The whole steering power cylinder, which is cast in one body, is not prone to problems such as oil leakage; The split steering power cylinder is welded twice, so if it is not handled well at the welding, it is prone to problems such as oil leakage and steering power cylinder damage. Therefore, it is obvious that the answer to this question is for difference.

steering power cylinder and hydraulic station selection: Select the type and structure of the steering power cylinder according to the operation requirements of the main engine. According to the external load force borne by the steering power cylinder, such as gravity, friction force of the external mechanism, inertia force and working load, determine the load change law of the steering power cylinder in each stage of the stroke and the power value that must be provided. Determine the diameter of the piston and piston rod according to the working load of the steering power cylinder and the selected oil working pressure. the flow rate of the hydraulic pump is determined according to the movement speed of the steering power cylinder, the diameter of the piston and the piston rod.

Answers to some questions about steering power cylinder:

Structural characteristics of the plunger cylinder? (1) The plunger hydraulic cylinder is a single-acting hydraulic cylinder, which can only move in one direction by hydraulic pressure, and the return trip of the plunger depends on other external forces or the weight of the plunger; (2) The plunger is only supported by the cylinder liner and is not in contact with the cylinder liner, so the cylinder liner is easy to process, so it is suitable for long stroke hydraulic cylinder; (3) the total pressure of the plunger during work, so it must have sufficient stiffness; (4) The weight of the plunger is often large, and it is easy to sag due to its own weight when placed horizontally, resulting in wear of the seals and guide side, so its vertical use is more favorable.

Design a hydraulic cylinder, the inner diameter of the cylinder is 100mm, what size of piston rod is best used?
This involves how much speed ratio you need, that is, the area ratio of the rod cavity and the rodless cavity, if the weight is relatively large, it is recommended that the speed ratio choose 2, that is, the piston rod diameter choose 70mm, under normal circumstances, the speed ratio choose 1.46, the piston rod diameter choose 55mm. Of course, there are many factors that affect the diameter of the piston rod, such as stroke, stroke is too long, in order to stabilize the work of the hydraulic cylinder, its diameter also needs to choose a relatively large, sometimes even non-standard products, need to choose according to the actual situation.