This article mainly introduces:

Uruguay hydraulic cylinder,press hydraulic cylinder manufacturer,press hydraulic cylinder

(Uruguay press hydraulic cylinder,produced by Hengyu Hydraulic Cylinder Factory）

press hydraulic cylinder are widely used in Uruguay，because of excellent fatigue and impact resistance，no need for deceleration device，long service life.So our company has designed press hydraulic cylinder for customers from Uruguay.

Introduction to press hydraulic cylinder:

When the press hydraulic cylinder is in use, ensure that the press hydraulic cylinder and the surrounding environment should be clean. The tank should be sealed to prevent contamination. Pipelines and fuel tanks should be cleaned to prevent falling off the oxide sheet and other debris. Clean with lint-free cloth or special paper. Twine and binder should not be used as sealing materials. Hydraulic oil according to the design requirements, pay attention to the change of oil temperature and oil pressure. When there is no load, unscrew the exhaust bolt for exhaust.

press hydraulic cylinder installation precautions: Before installing the press hydraulic cylinder into the system, the parameters on the press hydraulic cylinder label should be compared with the parameters when ordering. The base of the press hydraulic cylinder must have sufficient stiffness, otherwise the press hydraulic cylinder will bend upward into a bow when pressurized, so that the piston rod will bend.

The role of the press hydraulic cylinder in the mold industry: the press hydraulic cylinder has a variety of uses in the mold, one is that the core distance is very large, or because of the mechanism of the product, only the press hydraulic cylinder is reasonable or more cost saving. Let the side core be extracted before opening the mold. Hot runner is mainly based on the product to decide, sometimes customers require the use of hot runner, the price is more expensive, but there are many benefits, you can save raw materials, shorten the molding cycle The press hydraulic cylinder has an irreplaceable role in the heavy industry production process: it is mainly used in places that need to support heavy objects for a long time, and it can still support heavy objects when the oil pressure is removed, and it is safe and reliable. Can be used underwater, single action, load reversion, nut self-locking to make the load safer, especially in large projects, is easy to operate control and self-locking jack, designed with a safety pressure retaining device, built-in pressure relief valve to prevent overload, to protect the self-locking jack to facilitate safe operation. The connection of the device is connected by high pressure hose and threaded joint, which has the advantages of fast use and overcoming the shortcomings of fast traditional joint oil leakage. It is mainly used for equipment installation and toppling operation in various industries such as electric power, construction, machinery manufacturing, mining, railway bridge, shipbuilding and so on.

When using the press hydraulic cylinder product, be sure to operate safely in accordance with the specification documents provided by the manufacturer, and pay attention to protecting the press hydraulic cylinder block. If the press hydraulic cylinder block is damaged, it will cause adverse consequences: ① The material debris extruded from the scratch groove will be embedded in the seal, which may cause new scratch area marks while damaging the working parts of the seal during operation. ② Deterioration of the surface roughness of the inner wall of the press hydraulic cylinder, increase friction, easy to produce crawling phenomenon. ③ Increase the internal leakage of the press hydraulic cylinder, so that the working efficiency of the press hydraulic cylinder is reduced.

Answers to some questions about press hydraulic cylinder:

How is the hydraulic cylinder selected in the mechanical design manual?
First of all, it is necessary to meet your work needs, and the second is to meet the structural space of the cylinder and accessories. Three to consider the other parameters of the cylinder.

How to deal with the surface degreasing process before spraying paint after cylinder assembly, and what degreasing agent is used?
Cylinder painting, generally using the following process (note: the cylinder is best painted, do not spray powder coating, because the powder coating curing temperature is high, will lead to sealing defects and oil leakage) : Pre-degreasing - degreasing - washing - washing - pickling - washing - washing - table adjustment - phosphating - washing - washing - drying - polishing - spray primer - spray paint degreasing agent generally use neutral or weak alkaline degreasing agent, phosphating liquid generally use zinc phosphating liquid.