This article mainly introduces:

Mexico hydraulic cylinder,stainless steel cylinder manufacturer,stainless steel cylinder

(Mexico stainless steel cylinder,produced by Hengyu Hydraulic Co., Ltd）

stainless steel cylinder are widely used in Mexico，because of long service life，smooth movement，high work efficiency.So our company has designed stainless steel cylinder for customers from Mexico.

Introduction to stainless steel cylinder:

If the stainless steel cylinder piston rod is found to be worn, it can be brushed and plated first, then ground, and finally adjust the mating accuracy of the piston rod and the guide sleeve. At this time, the guide sleeve can be properly redrilled or the guide sleeve can be re-turned. When making the above repairs, remember to replace various rubber seals in time.

Do not regularly check the damage of the chrome layer of the stainless steel cylinder: completely extend the stainless steel cylinder and carefully check whether there is any surface damage such as injury, strain, welding slag, such as the surface damage position, in the stainless steel cylinder block < 20cm, and the damage depth < 5mm, should be repaired in time to prevent long-term damage to the stainless steel cylinder seal. Welding slag is strictly prohibited on the surface of the stainless steel cylinder.

When using the stainless steel cylinder product, be sure to operate safely in accordance with the specification documents provided by the manufacturer, and pay attention to protecting the stainless steel cylinder block. If the stainless steel cylinder block is damaged, it will cause adverse consequences: ① The material debris extruded from the scratch groove will be embedded in the seal, which may cause new scratch area marks while damaging the working parts of the seal during operation. ② Deterioration of the surface roughness of the inner wall of the stainless steel cylinder, increase friction, easy to produce crawling phenomenon. ③ Increase the internal leakage of the stainless steel cylinder, so that the working efficiency of the stainless steel cylinder is reduced.

stainless steel cylinder abnormal sound, hysteresis phenomenon cause and elimination method: the piston rod is extended with abnormal sound and hysteresis, if the stainless steel cylinder is placed for a period of time, the stainless steel cylinder may enter the air, and the movement can be normal after dozens of repeated movements. If it still cannot be eliminated, check whether the load is aligned with the axis of the piston rod; Retracted piston rod installation helps to align the load with the piston rod. If the flow is unstable, it will also lead to abnormal movement of the piston rod. Check the relevant components of the hydraulic system.

Answers to some questions about stainless steel cylinder:

What is st represented in the cylinder formula?
St is the original unit of kinematic viscosity, the abbreviation of Stokes, that is, Stokes, short for S. cm2/s has now been used. 1 s (St) = 10^-4m2/s.

Cylinder la-50-70st What does that mean?
Full model should be CX-LA-50-70ST, thin block cylinder, radial mounting, bore 50, stroke 70.